Siding Contractors in Tallahassee: How to Choose an Installer (+ Local Companies)

New siding is one of the biggest exterior projects a Tallahassee homeowner takes on, and the result depends as much on the installer as on the product. Humid summers, hard afternoon storms and hurricane-season winds don’t forgive sloppy flashing or the wrong fasteners. This guide covers what to check before you sign: licensing, Florida Product Approval, manufacturer credentials, warranties and permits, plus a list of local companies to compare.

Looking for prices? We cover those separately in our guides to siding installation in Tallahassee and siding replacement cost (vinyl vs. fiber cement).

What license does a siding contractor need in Florida?

Florida has no license titled “siding contractor,” so the right credential depends on who is doing the work and what else is in the job:

  • General, building or residential contractors are licensed by the state Construction Industry Licensing Board and can take on exterior projects. Window replacement, which often goes along with re-siding, requires a general, building or residential contractor license, or a local license that covers that work (Florida DBPR).
  • Specialty structure contractors are a state category whose scope includes siding, soffit, fascia and gutters, generally tied to aluminum, vinyl and similar materials. They cannot do work that affects the building’s structural integrity (Fla. Admin. Code r. 61G4-15.015).

If the job involves replacing rotted sheathing or framing, new windows or doors, or structural repair, expect a general, building or residential contractor to run it. Whatever the license type, ask for the number and check it on myfloridalicense.com. Our guide on how to verify a contractor license in Florida shows you how. This is general information, not legal advice. Licensing rules change, so confirm with DBPR for your specific project.

Florida Product Approval: ask for the number

Florida runs a statewide Product Approval system for exterior building products. Siding falls under the “panel walls” category, and you can look up approved products at floridabuilding.org (Village of Royal Palm Beach). The City of Tallahassee’s siding permit asks for the exterior veneer or soffit Florida Product Approval number, along with the manufacturer, the material and what it is applied over (City of Tallahassee).

Ask each bidder which exact product they plan to use and its Product Approval number. Make sure the installation follows the approval’s instructions, including fastener type and spacing, since that is what the product was tested to.

Manufacturer certifications worth asking about

Certifications don’t replace a license, but they show training on a specific product:

  • James Hardie (fiber cement): James Hardie’s contractor program has Select, Preferred and Elite tiers. James Hardie says it does not warrant installation of its products; members are independent businesses that may offer their own workmanship warranty (James Hardie).
  • Vinyl siding: The VSI Certified Installer program requires at least one year of vinyl siding experience, a training course and an exam. Certification is valid for five years, and certified installers carry a photo ID badge you can ask to see (Polymeric Exterior Products Association).

Understand the warranty before you sign

There are usually two separate warranties:

  • Product warranty from the manufacturer, covering defects in the siding itself. Read the exclusions, since many require installation to the manufacturer’s instructions.
  • Workmanship warranty from the contractor, covering leaks, loose panels and installation errors. Get the length and what it covers in writing.

Also ask whether the warranty transfers if you sell the house, and who you call if a problem shows up in year three.

Do you need a permit for siding in Tallahassee?

Yes. The City of Tallahassee requires a building permit for new or replacement windows, doors and siding. The City lists a review time of five work days, and the application includes a Notice of Commencement and a lien law acknowledgement (City of Tallahassee). Homes outside city limits are permitted by Leon County; see City of Tallahassee vs. Leon County permits.

Most homeowners have the contractor pull the permit. Be cautious if a contractor asks you to pull it yourself as an owner-builder, which makes you responsible for the work.

Tallahassee details to discuss with your installer

  • Rot and termites behind the old siding. Ask how the contractor will price sheathing or framing repairs found during tear-off. A per-sheet or per-foot price in the contract avoids surprises. Our article on wood rot and termite damage explains what to look for.
  • Water management. Ask about house wrap, flashing at windows and doors, and clearance between the siding and the ground or roofline.
  • Wind. Ask what wind rating the product carries and how fasteners will meet it.

Questions to ask siding contractors

  1. What is your license number and type?
  2. Which product will you use, and what is its Florida Product Approval number?
  3. Are your installers certified by the manufacturer? Are they employees or subcontractors?
  4. Will you pull the City or County permit?
  5. How will you price rotted sheathing or trim found during removal?
  6. What workmanship warranty do you give, in writing?
  7. Can I see a recent local job?

Before signing, run the contract through our Florida construction contract checklist.

Siding companies in Tallahassee to compare

These companies are listed in our directory, in no particular order. Descriptions are based on the services they list. Verify licensing and get written quotes before you hire.

Find a local siding contractor

Browse all siding contractors in our directory to compare services in your area. Do you install siding in Tallahassee or Leon County? List your business for free.

Image credits — cover photo: Houses with vinyl siding, South Side, 2022-08-17, 01 by Cbaile19, CC0, via Wikimedia Commons.

Related Posts

Leave a Reply

Your email address will not be published.