Plenty of older Tallahassee homes still run on electrical panels sized for a time before central air, big kitchens and electric cars. If you’re adding an EV charger, switching to a heat pump, or just tired of tripped breakers, a panel upgrade may be on your list. Here’s what it costs, the signs you need one, and how permits and City of Tallahassee Utilities fit in.
How much does an electrical panel upgrade cost?
Local Tallahassee pricing isn’t published in a reliable way, so the best starting point is national cost guides. Treat them as a ballpark and get local written quotes.
| Job | Typical cost range | Source (data year) |
|---|---|---|
| Upgrade 100A to 200A | $750 – $2,000 | HomeAdvisor (2022) |
| New 200A panel, installed | $1,500 – $3,000 | Inch Calculator (2023) |
| Replace a Federal Pacific or Zinsco panel | $1,500 – $4,000 | HomeAdvisor (2022) |
| Meter box install or replacement | $200 – $800 | HomeAdvisor (2022) |
| Upgrade to 400A service | $1,500 – $4,000 | HomeAdvisor (2022) |
These figures are from 2022 and 2023, so expect current quotes to come in higher. Inch Calculator notes that if the service line to your house can’t carry the new load, costs can climb to as much as $5,000 (Source, 2023). For a feel for local labor rates, see our guide to electrician costs in Tallahassee.
What affects the price of a panel upgrade?
- Panel only vs. full service upgrade. Swapping the panel costs less than also replacing the meter base, service entrance cable and main disconnect.
- Overhead vs. underground service. Underground runs can add trenching and conduit work.
- Code corrections. Grounding, bonding, or surge protection updates found during the job add cost.
- New circuits. A 200A panel doesn’t include the wiring for a new EV charger or heat pump. Those circuits are priced separately.
- Wall and drywall repair if the panel location changes.
Signs you may need a new electrical panel
- Breakers trip often, or lights dim when big appliances start.
- You still have a fuse box, or very limited service such as 60 or 100 amps.
- Scorch marks, buzzing, a burning smell, or a panel that feels warm.
- You’re out of breaker space and relying on double-taps or tandem breakers.
- You have a panel brand with a known track record of problems (see below).
Our electrical safety tips for older Tallahassee homes cover more warning signs.
Federal Pacific and Zinsco panels
Two older brands come up again and again. In 2024 a fire department in Columbus, Indiana, warned that Federal Pacific panels with “Stab-Lok” breakers may fail to cut power during an overload. It cited Consumer Product Safety Commission testing that found about 1 in 3 breakers defective, and said these panels are most common in buildings built before 1990 (Source). A 2025 insurance-industry article describes Zinsco breakers that can melt onto the bus bar, and says insurers may refuse coverage or charge more where these panels are present (Source). If you see either name inside your panel door, have a licensed electrician evaluate it.
Upgrading for an EV charger or heat pump
Electrification is a common reason to upgrade, but it isn’t automatic. Rewiring America says a standard Level 2 EV charger draws 40 amps or more, while a 16-amp Level 2 charger still adds at least 100 miles overnight. It also says most homes can fully electrify on an existing 100-amp panel with careful planning (Source). Options like lower-amp chargers, circuit-sharing devices, and 120V heat pump water heaters can sometimes avoid a full upgrade. Ask your electrician for a load calculation before you commit.
Permits and City of Tallahassee Utilities
Panel and service changes are permitted electrical work. Inside city limits, the City’s fee schedule (effective October 1, 2026) lists a $70.07 application fee for electrical alterations on a one- or two-family home, plus $15.63 for each electrical service or sub-panel (Source). Outside city limits, Leon County Building Inspection handles permits. Our guide to City vs. Leon County permits explains the difference.
If City of Tallahassee Utilities provides your power, its Electric Service Manual (2020) says customers must notify the Power Delivery Division before alterations or major load increases. Changes to service follow the same application process as new service. The homeowner supplies the meter socket, which must be on the City’s approved equipment list. Before a meter is set, an electrical inspection of the meter base and wiring is required (Source). The manual lists Power Delivery at (850) 891-5031 and Utility Customer Service at (850) 891-4968. In practice, your electrician should coordinate the disconnect, inspection and reconnect, so ask who handles each step before work starts.
This is general information. Confirm current requirements with the permitting office and your utility.
How to hire an electrician for a panel upgrade
- Hire a licensed electrical contractor, not a handyman. Verify the Florida license before signing.
- Ask for a load calculation and a written scope: panel size, meter base, grounding, surge protection, and any new circuits.
- Confirm the electrician pulls the permit and coordinates with the utility.
- Get two or three quotes and compare them line by line.
- Ask how long your power will be off, and plan for refrigerated food and medical devices.
Our guide to finding a licensed electrician in Tallahassee has more tips.
Find a local pro
Ready to get quotes? Browse our directory of Tallahassee electricians.
Are you a Tallahassee contractor? List your business in our directory.
Image credits — cover photo: US electrical switches and breaker panel by JJ, CC BY 2.0, via Wikimedia Commons.
Leave a Reply