If your Tallahassee home was built a few decades ago, the pipes inside the walls may be older than you think, and your insurance company may already be asking about them. Here’s what whole-house repiping costs, how PEX and copper compare, and which older pipe types cause the most trouble in Florida homes.
How much does it cost to repipe a house?
Angi’s repiping cost guide (accessed October 2026) puts the average whole-house repipe at about $7,500, with a range of $1,500 to $15,000 depending on the size of the home and how much pipe is replaced (Source).
| Item | Typical cost |
|---|---|
| Whole-house repipe (average) | $7,500 |
| PEX pipe, per linear foot | $0.40 – $2 |
| CPVC pipe, per linear foot | $0.50 – $1 |
| Copper pipe, per linear foot | $2 – $8 |
| Per fixture (average) | About $1,200 |
| Drywall repair afterward | About $300 (small) to $900+ (larger) |
| Permit | $50 – $500, depending on location |
All figures are national, from Angi (Source). Tallahassee’s own permit fees are covered below.
PEX vs. copper: which is better for repiping?
Material price is the biggest difference. Copper costs several times more per foot than PEX in Angi’s figures (Source). Labor, wall access and fixture count also drive the total, so compare full bids rather than pipe prices alone.
- PEX is flexible, so it can often be snaked through walls with fewer openings. That can mean less drywall patching and a shorter job.
- Copper is rigid and takes more cutting and soldering, which adds labor. Some homeowners still prefer it for its long track record.
Both appear as standard plumbing types on Citizens Property Insurance’s four-point inspection form (Source). Ask your plumber which material they recommend for your home’s layout and water conditions, and why.
What affects the cost of repiping?
- Size and layout. Bigger and multi-story homes cost more, and bathrooms take the most labor (Source).
- Number of fixtures. Every sink, toilet, tub and hose bib adds connections.
- Access. A crawlspace is easier to work from than pipes buried in a slab or tight walls.
- Wall repair and painting. Ask whether patching is included or left to you.
- Drain lines. Replacing supply lines is one job. Replacing old drain or sewer lines is a separate, often bigger one.
Polybutylene, galvanized and cast iron: problem pipes in older Florida homes
Polybutylene
Polybutylene (“poly”) pipe was widely used in new homes from about 1978 to 1995. A plumber interviewed by NBC 6 in 2023 said it was discontinued because the pipes and fittings tended to break (Source, 2023). The pipe makers settled a class-action lawsuit in 1995 (Source, 2008). A licensed plumber is the best way to confirm what you have.
Galvanized steel
Galvanized pipes rust from the inside over time. DC Water notes that galvanized pipes can collect lead released from upstream lead service lines, and says fully replacing them is the only sure way to stop that lead from getting into your water (Source). Angi lists galvanized pipes, and pipes over 60 years old, as signs a home is overdue for repiping (Source).
Cast iron drains
Many older homes have cast iron drain lines, which can build up scale or crack with age. If you notice slow drains, backups or sewer odors, ask a plumber about a camera inspection before deciding whether to replace them. A drain replacement is priced separately from a supply repipe.
Insurance: why your pipes matter in Florida
Florida insurers look closely at plumbing. The Florida Office of Insurance Regulation told NBC 6 that insurers may consider the age of the home, roof, plumbing, electrical wiring and heating and air. Citizens, the state’s insurer of last resort, said it does not insure properties with polybutylene piping (Source, 2023). Citizens’ four-point inspection form asks inspectors to identify the home’s pipe type, including galvanized and polybutylene (Source). If you’re buying an older home or renewing a policy, ask your agent what your insurer requires before you schedule work.
Do you need a permit to repipe a house in Tallahassee?
Inside city limits, the City requires a permit for any alteration or repair with labor and materials over $7,500 (Source). With an average repipe around $7,500, many whole-house jobs will cross that line, so ask your plumber about the permit up front. For one- and two-family homes, the City’s fee schedule (effective October 1, 2026) lists plumbing alterations at a $70.07 application fee plus $10.42 per fixture (Source). In unincorporated Leon County, permits go through the County instead. See our guide to City vs. Leon County permits. Your plumber should pull the permit and schedule inspections.
This is general information, not legal or insurance advice. Confirm requirements with the permitting office and your insurer.
How to hire a plumber for a repipe
- Verify the plumbing contractor’s Florida license and insurance.
- Get two or three written bids that list pipe material, fixture count, wall patching, permit, and cleanup. Our guide on comparing estimates can help.
- Ask how long the water will be off each day, and how long the whole job will take.
- Get the warranty terms for parts and labor in writing. Our Florida construction contract checklist covers what to include.
- Keep the final inspection record and invoice. Your insurer may ask for proof of the update.
If a leak has already caused damage, start with our first 24 hours after water damage guide.
Find a local pro
Ready for quotes? Browse plumbers in Tallahassee in our directory, and general contractors for wall repair afterward.
Are you a Tallahassee contractor? List your business in our directory.
Image credits — cover photo: Copper Water Pipes and Water Line Shutoff by Tony Webster, CC BY 2.0, via Wikimedia Commons.
Leave a Reply